Seafood CO2 Emissions Profiling Tool
The purpose of this tool is to allow users to explore the carbon implications of sourcing and supplying seafood. This will provide a better understanding of the major contributors to the "carbon footprint" of seafood products. It also provides insight into the influence that some aspects of the seafood production chain have on carbon emissions. Major potential drivers of emissions that the tool addresses include direct fuel inputs to fishing, the form and scale of transport used and the amount of time products are held in cold storage. In this tool, we have also incorporated yield rates and the degree to which processing co-products (wastes) are utilized, and users may alter these variables.
In many instances, the tool will result in estimates of total greenhouse gas emissions associated with finished seafood products that accurately reflect real world conditions (over 90% accurate). In some cases, however, the emissions estimated by this tool will not adequately reflect real world conditions because aspects of the production chain are not accounted for. Examples of these could include emissions associated with bait acquisition and storage, emission intensive packaging, etc.
Please note that this tool is intended for information purposes only and is not intended to establish the carbon footprint of a seafood product. If you are looking for a definitive carbon footprint for your product, please contact the Carbon Trust for further guidance. It should also be noted that aquaculture-sourced products are not currently supported. We hope to add this if interests warrants.
We have attempted to build a tool that is robust, easy to use and flexible.
Greenhouse Gas Emissions Profiling Tool - Terms and Conditions of Use
1.1 Use of our Greenhouse Gas Emissions Profiling Tool including our webpage at http://www.seafish.org/ghgemissionsprofiler/ on which it is hosted (“the Tool”) is conditional upon you accepting the following terms and conditions (“the Terms”).
1.3 By using the Tool, you confirm that you accept these Terms and that you agree to comply with them. If you do not accept these Terms then you are not permitted to use the Tool.
2. Our Details
The Tool is provided by Seafish Industry Authority, a statutory body established under the Fisheries Act 1981 with a place of business at 18 Logie Mill, Logie Green Road, Edinburgh EH7 4HS (“Seafish”, “us”, “our” or “we”) and has been constructed by researchers at Seafish, Dalhousie University (a Canadian University with its principal office in Halifax, Nova Scotia Canada B3H 4R2) and SINTEF (an independent research organisation with its principle office in Stiftelsen Sintef, Box 4760 Sluppen, N-7465 Trondheim, Norway) (our “Partners”).
3. Availability of the tool
3.1 We do not guarantee that the Tool, or any content on it, will always be available or that access to the Tool will be uninterrupted and we reserve the right to (without prior notice):
3.1.1 suspend, withdraw or change any part of the Tool at any time; or
3.1.2 restrict access to the entire Tool or parts of the Tool.
3.2 We will not be liable for any loss or damage caused by the unavailability of the Tool or parts of the Tool, for any reason and for any length of time.
4. Use of the tool/tool results
4.1 You must only use the Tool for lawful purposes and you must not:
4.1.1 interfere with, damage or disrupt any part of the Tool, any equipment or network on which the Tool is stored or any software used in the provision of the Tool;
4.1.2 knowingly introduce viruses, trojans, worms, logic bombs or other material which is malicious or technologically harmful; or
4.1.3 attack the Tool via a denial-of-service attack or a distributed denial-of-service attack, by breaching these provisions, you would commit a criminal offence under the Computer Misuse Act 1990. We will report any such breach to the relevant law enforcement agencies/authorities and we will co-operate with those authorities by disclosing your identity to them. In the event of such a breach, your right to use the Tool will cease immediately.
4.2 The Tool does not require users to submit any personal data (as defined in the Data Protection Act 1998). You warrant that any such submission of data, information or content to the Tool shall not contain any personal data, and you will be liable to us and indemnify us for any breach of that warranty.
4.3 You are responsible for ensuring that all persons (including but limited to, any of your employees, agents or representatives) who access the Tool through your internet connection are aware of these Terms and that they comply with them.
5. Intellectual property and confidentiality
5.1 We, in conjunction with our Partners, are the owners or the licensees of all intellectual property rights in the Tool and the Tool Results (as defined below). The Tool and the Tool Results are protected by copyright laws and all such rights are reserved to us and our Partners, and third party data providers.
5.2 You may print off one copy of any page(s) from the Tool and the Tool Results for your own internal business purposes only. You must not use any Tool Results for commercial purposes without first obtaining a licence from us, our Partners and/or our licensors.
5.3 Except as permitted under applicable law and by these Terms under condition 5.2, you must not use, copy, publish, licence, sell, adapt or translate the Tool or any part of the Tool, without our consent. Furthermore, you must not copy, publish, licence, sell, adapt or translate any information, data or other results created or generated by the Tool (“the Tool Results”).
5.4 Neither we, nor our Partners store any:
5.4.1 data or content you input into the Tool;
5.4.2 or any Tool Results,
therefore, we cannot provide you with a copy of any historic Tool Results previously generated by you.
5.5 Any data or content you upload to the Tool will be done at your own risk with data considered non-confidential and non-proprietary.
6. Third party content
The Tool include links to other internet sites and/or resources provided by third parties (including our Partners and the British Standards Institute). These links are provided for your information only and we do not control those sites and/or resources, and we accept no responsibility for them for any loss or damage that may arise from your use of any third party sites, resources or content.
7. Linking to the tool
7.1 The Tool must not be framed on any other site and you must not establish a link to the Tool on any other site without permission.
7.2 If you wish to use any Tool Results for a purpose or in a manner other than that set out above, please address your request to email@example.com
8. Our liability
8.1 The Tool and the Tool Results are not intended to amount to advice or guidance on which reliance should be placed. We therefore disclaim, to the fullest extent permitted by law, all liability and responsibility arising from any reliance placed on such Tool Results by any users of the Tool, or by anyone who may be informed of or provided with any Tool Results.
8.2 We make no guarantees that the Tool is free from computer viruses. It is strongly recommended that you check for such viruses before using the Tool or any of its contents.
8.3 The Tool and the Tool Results are provided without any guarantees, conditions or warranties as to their accuracy or completeness and we cannot guarantee that the Tool or the Tool Results will be free of any errors or omissions. It is your responsibility to ensure the accuracy and completeness of any information or data submitted by you or any other user of the Tool.
8.4 To the fullest extent permitted by law, we exclude all conditions, warranties and other terms which may apply to the Tool and/or Tool Results, whether express or implied.
8.5 Please note that in particular, we will not be liable for any loss or damage, whether in contract, delict (including negligence), breach of statutory duty, or otherwise, even if foreseeable, arising out of or in connection with:
8.5.1 use of or inability to use the Tool;
8.5.2 any Tool Results, or reliance upon them;
8.5.3 loss of profits/revenue, sales, anticipated savings, contracts, business or business opportunity;
8.5.4 business interruption;
8.5.5 loss of goodwill or reputation;
8.5.6 any loss or corruption of data (including software) or information; or
8.5.7 any indirect or consequential loss or damage.
8.6 This does not affect our liability for death or personal injury arising from our negligence, or our liability for fraudulent misrepresentation or misrepresentation as to a fundamental matter, or any other liability which cannot be excluded or limited under applicable law.
9.1 If we fail to enforce any provision of the Terms, that failure will not preclude us from enforcing either that provision (or any similar provision) on a later occasion.
9.2 Nothing in these Terms shall confer on any third party any benefit or the right to enforce any term of the Terms.
9.3 We reserve the right to amend or replace the Terms at any time and any such amendments or replacement terms shall be binding on you. If we make any substantial changes we will notify you by posting a prominent notice on the Tool.
9.4 We may update the Tool from time to time and may change the content at any time. However, please note that any of the content on our Tool may be out of date at any given time, and we are under no obligation to update it.
10. Jurisdiction and applicable law
10.1 The Scottish courts will have exclusive jurisdiction over any claim arising from, or related to, use of the Tool.
10.2 These Terms and any dispute or claim arising out of or in connection with them or their subject matter or formation (including non-contractual disputes or claims) shall be governed by and construed in accordance with Scots law.